GRAYTOOLS

Capacity: 4-1/4"

Width 18" Depth 10-1/8" Height 13-1/4"

Contains: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28mm Includes 2 Socket rails # SB151611

Flat Chisel: 1/2, 5/8, 3/4, 7/8, 1 Long Taper Punch: 5/32, 3/16 Prick Punch: 3/8 Taper Punch: 1/16, 3/32, 1/8, 3/16, 1/4 Pin Punch: 1/8, 3/16, 1/4,...

Width 19" Depth 7-1/8" Height 7.50"

Shank Length: 3" I.D. Eye: 2-3/16" O.D. Eye: 4-7/16" Overall Length: 8.22" Center Of Eye To Shoulder: 2.94" Rated Capacity: 18,4 lbs

Shank Length: 3½" I.D. Eye: 2½" O.D. Eye: 5-3/16" Overall Length: 9.47" Center Of Eye To Shoulder: 3.32" Rated Capacity: 26,6 lbs

2 Jaw Maximum Reach: 3" Maximum Spread: 4.5"

Standard Lift 10'

Standard Lift 20'

Width 30.20" Depth 19.50" Height 38.30"

Shank Length: 4" I.D. Eye: 3¼" O.D. Eye: 6-7/8" Overall Length: 11.88" Center Of Eye To Shoulder: 4.38" Rated Capacity: 47,6 lbs

Capacity: 5.5"

Contains: 68913 and 68909

Contains: 68713 and 68709

Overall Length: 14" Replacement Handle Part No.: 59-854

Shank Size: 7/8"

Contains: Standard: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" Deep: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16",...

4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" 20 Tooth Ratchet Flex Handle 2" Extension 3...

1/16" - 1/2" x 64ths, Jobber length 135° split point Grade: M35 Steel Spec. DIN1412-ANSI Standard-N

10-1/2" x 10-1/2" Fuel and solvent resistant Sturdy plastic Stackable

Width 22" Depth 8-3/4" Height 13-1/4"

RB221, RB222 & RB223.

718SW (2"), 718W (5") & 719W (10")

V602W (2"), V604W (4") & V606W (6").

Standard Lift 10'

Standard Lift 20'

Standard Lift: 5'

Overall Length 4" Bit Length 2"

Overall Length 7"

Overall Length 10"

Overall Length 13"

 Overall Length 7-1/2" No. of Teeth 40.00

Shank Length: 1¼" I.D. Eye: 1" O.D. Eye: 1-21/32" Overall Length: 3.28" Center Of Eye To Shoulder: 1.13" Rated Capacit: 1,48 lbs

Shank Size: 7/8"

Overall Length: 14" Replacement Handle Part No.: 59-854

Set Includes: Slotted #: 3, 4, 5, 6 & 7 Roberston® #: 1, 2 & 3 Phillips® #: 0, 1, 2 & 3 Pozidriv® #: 1, 2 & 3 Hex #: 2, 2.5, 3, 4 &...

5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22mm 32 Tooth Ratchet ...

Shank Size: 7/8"

Contains: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/8", 1 1/4" 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 ,21 22,...

B6A, B210B, B245B, B231B

T31W (3"), T4W (6"), T41W (8") & T5W (12")

Jaw Opening: 5.5" Overall Length: 13.5" Height: 6.5" Jaw Depth: 2"

Jaw Opening: 6" Overall Length: 14" Height: 7" Jaw Depth: 2.6"

Carbon tap, and die set, NC/NF, with taps and 1" O.D. round dies. 1" O.D. round dies: 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4"-20, 1/4"-28, 5/16...

Shank Size: 7/8"

Width 26" Depth 19" Height 36"