Handtools

All drawers feature ball bearing slides for smooth operation Easy to clean powder coat paint finish Drawer liners included Needle bearing casters ...

All drawers feature ball bearing slides for smooth operation Powder coated paint finish Tubular lock and key for maximum security Drawer liners in...

Overall Length 13"

Overall Length 10"

Overall Length 7"

Overall Length 4" Bit Length 2"

Overall Length 4" Bit Length 2"

Overall Length 4" Bit Length 2"

Overall Length 4"  Bit Length 2"

 Overall Length 4"  Bit Length 2"

Contains: 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16", 3/4" x 25/32", 13/16" x 7/8", 15/16" x 1"

Contains: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4" Includes Organizer #93815

Contains: 7, 8, 10 ,12, 14, 16, 17, 20, 22, 24, 26, 28, 30, 32 Includes organizer # 94815

Contains: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"

Contains: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm

Includes: Two bearing separators (2 & 3) Four sets of extension shafts 5 Cross slide puller with center screw (yD쳌¿-10 x 7) Weight: 10 lbs.

Blade Thickness (inches): 0015, .002, .003, .004, .005, .006,.007, .008, .009, .010, .011, .012,.013, .014, .015, .016, .017, .018,.019, .020, .021...

Blade Thickness (mm): .04, .05, .06, .07, .08, .09, .10, .15,.20, .25, .30, .35, .40, .45, .50, .55, .60, .65, .70, .75, .80, .85, .90, .95, 1.00 ...

3 Pieces: C66 (18"), C67 (24"), C68 (30") Weight: 9.2 lbs.

5 Pieces: CB27 (Brass Taper Punch 1/4") CB30 (Brass Pin Punch 3/8") CBR6 (Brass Drift Punch 3/8") CBR7 (Brass Drift Punch 1/2") CBR8 (Brass Drift P...

Flat Chisel: 1/2, 5/8, 3/4, 7/8, 1 Long Taper Punch: 5/32, 3/16 Prick Punch: 3/8 Taper Punch: 1/16, 3/32, 1/8, 3/16, 1/4 Pin Punch: 1/8, 3/16, 1/4,...

Flat Chisel: 1/2", 5/8", 3/4", 7/8" Cape Chisel: 1/4" Long Taper Punch: 5/32", 3/16" Taper Punch 3/32", 1/8", 3/16" Pin Punch: 1/8", 3/32", 3/16" C...

Pin Punch: 1/8, 5/32, 3/16, 7/32, 1/4 Pouch: 100067

Flat Chisel: 1/2", 5/8", 3/4" Taper Punch: 3/32, 5/32, 3/16 Pin Punch: 5/32", 3/32", 3/16" Centre Punch: 3/8"